Testing and measurment Machines

  • 3103 IHRD Micro Compact Hardness Tester Zwick

    Range of application
    The IRHD micro compact hardness tester (Zwick 3103) is designed for hardness tests to IRHD micro on plastics and rubber. The requirements of test standards ISO 48, ASTM D 1415, NFT 46003, and BS 903, part A26 are achieved.
    The hardness tester is used in quality assurance, in goods receiving and outgoing goods checks at manufacturers and processors from the plastics and rubber industry.

    More Detail

  • 5030/6030 Indentec Macro Hardness Tester Zwick

    Range of applications
    • Vickers testing to ISO 6507 and ASTM E384, UKAS accredite.

    More Detail

  • AFlow Extrution Plastomester Zwick

    Applicational range

    The Aflow is noted for having a high degree of automation: whether simple cleaning and defined pre-compacting at the press of a button, or infinitely settable test loads – the Aflow adapts to your test tasks. The extrusion plastometer supports all globally common standards and procedures, including ISO 1133, ASTM D 1238 according to Methods A, B, C and D.

    The pneumatic precompacting feature allows the polymer to be defined and evenly precompacted at the press of a button – saving time and effort. Furthermore, testXpert II determines the test results in the automatic parameter control, so that the Aflow automatically selects the correct test parameters. This precompacting feature gives you a high degree of user independence even if the testers change often. To further accelerate the test procedure after the test, you have the possibility to eject the remaining material from the extrusion barrel with a force of up to 80 kg and then to clean the extrusion barrel with a pneumatic cleaning device at the press of a button. Space-saving, multi-device operation lets you connect up to six Aflow or Mflow extrusion plastometers to a PC. Of course, you can also use the Aflow in Stand Alone Mode without a PC.

    More Detail

  • Aibot X6

    The Aibot X6 is an autonomously flying hexacopter, specifically designed for demanding tasks in surveying, industrial inspection, agriculture and forestry. Equipped with a high level of artificial intelligence, this UAV reaches virtually any target and can independently create high resolution images and videos. An unmatched feature of the Aibot X6 offers the possibility to adapt varying kinds of sensors such as hyper- and multispectral sensors, infrared and thermal sensors and sensors for other industry-specific missions.

    More detail 

     

     

  • Aircraft Tire Dynamometer Testing Machine

    Application:

    Legal testing according to the test procedures of the different countries. Customized  starting and landing to the companies test standards.

    Functional principle for Aircraft Tire Dynamometer

    More detail

  • AllroundLine material testing machines Z005 up to Z020

    Type

    Item number

    Z020 TN

    1004485

    Z020 TH

    1004487

    Z020 TE

    1004489

    Z020 TNW

    (1  1004486

    Z020 THW

    1004488

    Z020 TEW

    1004490 (1

     
     

    Load frame

                 
    Test load FN in tensile / compression direction  

    20

     

    20

     

    20

     

    20

     

    20

     

    20

     

    kN

    Test area width 440 440 440 640 640 640 mm
    Height of the lower test area, without accessories  

    1030

     

    1430

     

    1785

     

    1000

     

    1400

     

    1755

     

    mm

    Height of the upper test area, without accessories /supplem.

    crosshead required)

     

     

    1015

     

     

    1415

     

     

    1785

     

     

    1015

     

     

    1415

     

     

    1785

     

     

    mm

    Height without leg profiles                    a

    1

    1314 1714 2084 1324 1724 2094 mm
    Height with leg profiles                    a

    2

    1528 … 1868 … 2238 … 1538 … 1878 … 2248 …  

    mm

    2108 2508 3078 2118 2518 3088
    Width without leg profiles 680 680 680 880 880 880 mm
    Width with leg profiles 856 856 856 1056 1056 1056 mm
    (and electronics console) (1044) (1044) (1044) (1244) (1244) (1244) mm
    Depth without leg profiles (3 (4 552 552 552 552 552 552 mm
    Depth with leg profiles (3 690 690 690 690 690 690 mm
    Overall weight with electronics console, without leg profiles  

    165

     

    187

     

    209

     

    212

     

    234

     

    256

     

    kg

    Noise level at maximum speed  

    61

     

    61

     

    61

     

    61

     

    61

     

    61

     

    dB(A)

     

    Drive system

                 
    Crosshead speed up to 110% 0.0005 0.0005 0.0005 0.0005 0.0005 0.0005  

    mm/min

    of test load (v    … v    )

    min           Nom

    … 1000 … 1000 … 1000 … 1000 … 1000 … 1000
    Increased crosshead return speed (at reduced force)  

    1500

     

    1500

     

    1500

     

    1500

     

    1500

     

    1500

     

    mm/min

    Drive system´s travel resolution 0.32495 0.32495 0.32495 0.32495 0.32495 0.32495 nm
     

    Power ratings

                 
    Electrical connections (2 230 230 230 230 230 230 V
    Power rating 2 2 2 2 2 2 kVA

    More Detail

  • Balancing TBR/LTR/PCR Tire testing machine

    Application:

    Standard testing and OEM testing according to the test procedures of the automotive companies. Customized Uniformity, Balancing and Run-out testing according to the tire manufacturers internal test standards:

    • Tire static and dynamic balancing

    Functional principle for Uniformity PC, Light Truck, Truck and Bus Tire

    More detail

  • CFlow Extrution Plastomester Zwick

    Applicational range

     The Cflow is a compact instrument that allows rapid determination of the Melt mass flow rate of plastics. It is specifically designed for the processors of plastics that are less subject to extrusion tests and which do not require a connection to a PC.

    The temperature control of the heating elements, the heating chamber and the extrusion barrel are perfectly matched to each other. The temperature is generated where it is needed. That ensures an excellent distribution of temperature across the full height of the barrel from the outset.

    Rapid device control is facilitated by the test granulate contained in the scope of delivery. Addition control options are available for the temperature in the extrusion barrel, for the diameter of orifices and barrels with plug gages. An automatic or manual extrudate cutter, a separating door and a die plug are optionally available for the Cflow.

    More Detail

  • CLine material testing machines Z005 up to Z010

    Type

    Item number Fmax

    Z005                                     Z010

    1006325                               1006326

    5 kN                                          10 kN

    Power ratings
    Electrical connections 230 VAC (1 PH, N, PE)
    Range of tolerance ± 10 %
    Mains frequency 50/60 Hz
    Power rating 0,7kVA                                  0,8kVA
    EMC characteristics Conforms to the relevant highest requirements of EN 63126-1
    (Class B immunity, Class A emitted interference)

    More Detail

  • Container Spacing Device

    The Container Spacing Device (CSD) offers a positive method to space containers that are transported on a table top conveyor. This compact device is compatible with round and non-round containers and is ideal for providing bottle spacing or line flow control.

    More detail

     

     

     

     

     

     

     

     

     

  • Density Comparator

    The Density Comparator offers a proven, accurate and reliable method for determining the density of glass and related materials for routine control of composition. This compact table-top device utilizes the Sink-Float approach to determine the density of a sample in accordance with ASTM Standard Method C729.

    With the Density Comparator, up to 6 samples can be tested simultaneously. A circulating water bath with automatic and manual heating controls, as well as a cooling coil for rapid system cooling provides the means for precise temperature control of samples and medium according to test requirements.

    More detail

     

     

     

     

     

     

     

     

     

  • Digital Brinell hardness tester

    Innovative closed-loop technology. The tester incorporates the latest load cell technology. The test load is applied via a closed-loop control unit with a load cell, a DC motor and an electronic measurement and control unit. The result is highly accurate Brinell hardness measurements at all test loads up to 0.5%. The common load overshoot or undershoot as known from traditional dead weight, or open-loop, systems is eliminated. The absence of mechanical weights not only eliminates friction problems but also makes the equipment less sensitive to miss alignments caused by vibrations.

    More detail