ZwickiLine material testing machines Z0.5 up to Z2.5
Range of application
zwickiLine is a powerful, flexible and cost-effective testing solution for many different materials and components and is ideal for both research and development and routine quality assurance. A wide range of equipment options allows zwickiLine to be used for tests on plastics, elastomers, metals, composites, paper, board, textiles, foams, foodstuffs and components.
- Technical Data
Made in Germany
zwickiLine, including all mechanical, electronic and software components, together with the extensive range of accessories are developed and produced at Zwick Roell’s production facility in Germany and are therefore ideally matched to each other. This means that zwickiLine is an extremely high-quality product and also allows Zwick to offer the best possible support.
Extremely low minimum speeds can be set, combined with excellent speed-accuracy. The drive also delivers
high crosshead travel resolution; this is important in tests on components requiring a high degree of travelprecision and in tests on specimens with high levels of stiffness and low travel, for example. The high test speed range can be used without restriction. In addition, test loads up to 110% of the machine nominal load are permissible to compensate for heavy combinations of test fixtures, accessories etc.
Innovative high-quality load-frame design
• The new zwickiLine extruded profile possesses 6 continuous, freely accessible standard-profile slots for individual mounting of specimen materials, fixtures, safety devices, accessories etc.
• The generous test-area depth enables larger fixtures to be used and larger components tested, the wide base crosshead enabling optimum securing and retaining.
• High-quality machine design, including for example hard-wearing ceramic control buttons for the electronics, ensures a long service life.
High stiffness and precision crosshead guide
The stiff load-frame profile and large connecting surfaces reduce the inclination angle of the crosshead under load, enabling very precise alignment and application of force to the specimen. This is advantageous for flexure tests, compression tests, precision tests on components etc.
Technical data of the instruments
|Finish||RAL 7021 black grey and RAL 7037 dusty grey|
|Ambient temperature||+10 ... +35 °C|
|Air humidity||20 ... 90 %|
|Conformity||to ISO 9000 and CE|
|Input signal, set-value preset||digital|
|Controller / Cycle time||adaptive / 1000 Hz|
|Positioning, repetition accuracy||±2 μm|
|Measurement and control electronics|
|Number of slots available for measurement||2 synchronized module bus slots (expandable to 5)(1|
|and control modules||1 synchronised PCIe slot|
|Force measurement||Grade 0.5 / 1 see load cell, to|
|DIN EN ISO 75001, ASTM E4, JIS B7721|
|Measurement range||up to 165 % of F|
|Calculated resolution (e.g. in tensile / compression direction)||24 bit|
|Data acquisation rate, internal||400 kHz|
|Test data transmission rate to the PC||500 Hz (optional 2000 Hz)|
|Zeropoint correction||automatic at start of measurement|
|Measurement signal runtime correction for all channels||yes|
|Electrical connections||100 ... 240 V (Wide-range input)|
|Range of tolerance||± 10 %|
|Power rating||0.44 kVA|
|Mains frequency||50/60 Hz|
• Additional upper crosshead
• Specimen grips
• Test tools